Click on the picture for a printable copy
This floor has polyurethane finish - glue won't stick to it
InstallDivider/InstallDivider00L.png
Other Dividers locate it - straight and in position
InstallDivider/InstallDivider01L.png
A 1/4" wide chisel is perfect for taking off the finish
InstallDivider/InstallDivider03L.png
Leave the finish in the doorway unless you are installing a door with a threshold
InstallDivider/InstallDivider05L.png
The shine is gone and some wood is showing for the glue to grab
InstallDivider/InstallDivider06L.png
Scrape a line for glue in the ceiling paint too
InstallDivider/InstallDivider08L.png
The Divider guides the chisel for accuracy and safety
InstallDivider/InstallDivider09L.png
The ceiling glueline can go full length (there's no door space)
InstallDivider/InstallDivider10L.png
The "locators" are ready - Install the 1st floor Dividers first
InstallDivider/InstallDivider11L.png
Tip the Divider, put it in the house about 1/2" from the Front
InstallDivider/InstallDivider13L.png
Straighten the Divider while lifting the floor above
InstallDivider/InstallDivider14L.png
Tight against the Front -- take out the locators
InstallDivider/InstallDivider17L.png
Check that it's straight all the way along its length
InstallDivider/InstallDivider19L.png
A stair-side Divider must line up with the stair hole
InstallDivider/InstallDivider20L.png