Using the Spacers

It is far easier to paint and sand before assembly 4600-003-lg.png

Faux-Wood flooring is a great look 4600-000-lg.png

... but it must be done before assembly (click above for a video) 4600-00-lg.png

DHTMLGoodies.com This is a special-project un-painted build - not an easier way to paint!! ../../RGT_Website_Assets/ajax-loader.gif"

Gluing the Base Floor Groove to the Base Floor 4600-01-lg.png

Flaps of tape on the (temporary use) Gable Triangles 4600-02-lg.png

Setting the Side onto the Base without smearing glue 4600-03-lg.png

The Gable Triangle holds it straight, the tape holds it tight 4600-04-lg.png

Both Sides, straight, tight, and lined up in the back 4600-05-lg.png

Tape to hold it tight in the front 4600-06-lg.png

The next parts to use: Front Set, Front Spacers, Dividers 4600-07-lg.png

The Spacers locate the Front Set 4600-08-lg.png

One Spacer from each side 4600-09-lg.png

Tight 4600-10-lg.png

The Dividers locate the Front Set from the back edge - lined up carefully 4600-11-lg.png

Two Spacers, Two Dividers - these are temporary! 4600-12-lg.png

This is the last chance to pre-paint... much easier! 4600-12B-lg.png

Glue and weight the Front Set 4600-13-lg.png

Let the glue set, remove the spacers, then let the glue dry 4600-14-lg.png

Next: the Middle Floor ../../Buttons/ClickHere.png