Paint and Install the Stairs

Paint the stairs; one coat only (do not sand first!) StairsLanding/Stairs01_lg.jpg

Don't put on extra paint or extra coats StairsLanding/Stairs02_lg.jpg

Sand after the first-coat StairsLanding/Stairs03_lg.jpg

The paint reinforced the fibers so now it won't get fuzzy StairsLanding/Stairs04_lg.jpg

Sand until the surface feels smooth and soft StairsLanding/Stairs05_lg.jpg

Sand thoroughly - every surface, every edge, every pocket StairsLanding/Stairs06_lg.jpg

Clean the inside corners StairsLanding/Stairs07_lg.jpg

The second coat goes on smooth and creamy (often two coats is enough) StairsLanding/Stairs08_lg.jpg

Glue the top and bottom StairsLanding/Stairs09_lg.jpg

Tip the Stairs in place StairsLanding/Stairs10_lg.jpg

Check the stairs at the top: flat with the floor StairsLanding/Stairs11_lg.jpg

Weight the stairs to keep them tight against the wall StairsLanding/Stairs12_lg.jpg

... on to the #6803: Banister and Landing ../Buttons/Next.png