Tools:
Hot Air Gun
Thin Spatula
Heat the spatula with the hair dryer (or hot air gun)
ModelsAssembled/TakeApart/TakeApart6AL.png
The railings are held with a spot of hot-melt glue under the bottom rail
ModelsAssembled/TakeApart/TakeApart06L.png
Lift the Railing off of the peg at the top
ModelsAssembled/TakeApart/TakeApart08L.png
Keep the spatula hot to clean off the glue
ModelsAssembled/TakeApart/TakeApart10L.png
Windows and Doors are held with two spots of glue inside the cutout
ModelsAssembled/TakeApart/TakeApart20AL.png
Cut the glue from the inside (don't heat the window panes directly)
ModelsAssembled/TakeApart/TakeApart21AL.png
Keep the knife hot (don't get heat directly on the window pane)
ModelsAssembled/TakeApart/TakeApart14AL.png
Shutters are easiest when the Window is already out
ModelsAssembled/TakeApart/TakeApart14BL.png
The hot spatula will work the shutter loose
ModelsAssembled/TakeApart/TakeApart15L.png
The hot knife lifts off the glue residue
ModelsAssembled/TakeApart/TakeApart17L.png
Sometimes it's easiest to lift off the gingerbread or Facia
ModelsAssembled/TakeApart/TakeApart11L.png
Gingerbread glues to a backer with spots of glue
ModelsAssembled/TakeApart/TakeApart13L.png
It's almost impossible to finish the inside with the stairs in place
ModelsAssembled/TakeApart/TakeApart22L.png
I remove Blind Dividers (JM907 and JM1065) to finish in front of them
ModelsAssembled/TakeApart/TakeApart18L.png
