DHTMLGoodies.com

00. D45 Dormer ../../../RGT_Website_assets/ajax-loader.gif

DHTMLGoodies.com

01. See "Supplies" at left to find the products we use 01D.png

DHTMLGoodies.com

02. Sides, Left and Right 02D.png

DHTMLGoodies.com

03. This is the outside 03D.png

DHTMLGoodies.com

04. This is the front edge 04D.png

DHTMLGoodies.com

05. Front and Roofs 05D.png

DHTMLGoodies.com

06. Square the corners with a coarse file, utility knife, or saw 06D.png

DHTMLGoodies.com

07. One cut from each direction 07D.png

DHTMLGoodies.com

08. This is the inside face 09D.png

DHTMLGoodies.com

09. This is the outside face 08D.png

DHTMLGoodies.com

10. Prepare tape flaps on the outside 10D.png

DHTMLGoodies.com

11. Turn over so the inside is up 11D.png

DHTMLGoodies.com

12. Apply glue to the front edges of the Sides 12D.png

DHTMLGoodies.com

13. Lined up along the edge and in the upper corner 13D.png

DHTMLGoodies.com

14. Make it fit here 14D.png

DHTMLGoodies.com

15. Stretch the tape for a tight fit 15D.png

DHTMLGoodies.com

16. A square object to hold the Sides straight while the glue dries 16D.png

DHTMLGoodies.com

17. The roofs with the top faces touching 17D.png

DHTMLGoodies.com

18. The Roofs showing the inside faces 18D.png

DHTMLGoodies.com

19. The Left Roof is larger than the Right Roof 19D.png

DHTMLGoodies.com

20. The Right Roof fits against the inside of the Left Roof at the peak 20D.png

DHTMLGoodies.com

21. This is the back edge... the bevels line up 21D.png

DHTMLGoodies.com

22. The beveled eaves are down in use 22D.png

DHTMLGoodies.com

23. Prepare flaps of tape on the Left Roof 23D.png

DHTMLGoodies.com

24. Apply glue to the top edge of the Right Roof 24D.png

DHTMLGoodies.com

25. Stretch the tape for a tight fit 25D.png

DHTMLGoodies.com

26. Lined up on the top, front, and back 26D.png

DHTMLGoodies.com

27. Use tape and/or a square object to hold the Right Roof straight 27D.png

DHTMLGoodies.com

28. When the glue is dry, smooth the edges with 100 grit sandpaper 28D.png

DHTMLGoodies.com

29. Smooth the Roofs too 29D.png

DHTMLGoodies.com

30. This is how the Roofs fit 30D.png

DHTMLGoodies.com

31. Glue 31D.png

DHTMLGoodies.com

32. Lined up in back 32D.png

DHTMLGoodies.com

33. Straight and parallel under the eaves 33D.png

DHTMLGoodies.com

34. Adjust the fit - tape it tightly 34D.png

DHTMLGoodies.com

35. Line up the other side - tape it tightly 36D.png

DHTMLGoodies.com

36. Clean up excess glue 35D.png

DHTMLGoodies.com

37. This way of taping doesn't yank the Front forward 37D.png

DHTMLGoodies.com

38. Tape it both ways 38D.png

DHTMLGoodies.com

39. Stretch the tape for a tight fit 39D.png

DHTMLGoodies.com

40. Press the Dormer to a flat surface - let the glue dry 40D.png

DHTMLGoodies.com

41. Ready to finish 41D.png

Assembling the D45 Dormer		Click on the Display Image for a larger, printable photo
Tape - (high adhesion) Glue - Assembly File double-cut coarse Finishing Installation	DHTMLGoodies.com00. D45 Dormer ../../../RGT_Website_assets/ajax-loader.gif DHTMLGoodies.com 01. See "Supplies" at left to find the products we use 01D.png DHTMLGoodies.com 02. Sides, Left and Right 02D.png DHTMLGoodies.com 03. This is the outside 03D.png DHTMLGoodies.com 04. This is the front edge 04D.png DHTMLGoodies.com 05. Front and Roofs 05D.png DHTMLGoodies.com 06. Square the corners with a coarse file, utility knife, or saw 06D.png DHTMLGoodies.com 07. One cut from each direction 07D.png DHTMLGoodies.com 08. This is the inside face 09D.png DHTMLGoodies.com 09. This is the outside face 08D.png DHTMLGoodies.com 10. Prepare tape flaps on the outside 10D.png DHTMLGoodies.com 11. Turn over so the inside is up 11D.png DHTMLGoodies.com 12. Apply glue to the front edges of the Sides 12D.png DHTMLGoodies.com 13. Lined up along the edge and in the upper corner 13D.png DHTMLGoodies.com 14. Make it fit here 14D.png DHTMLGoodies.com 15. Stretch the tape for a tight fit 15D.png DHTMLGoodies.com 16. A square object to hold the Sides straight while the glue dries 16D.png DHTMLGoodies.com 17. The roofs with the top faces touching 17D.png DHTMLGoodies.com 18. The Roofs showing the inside faces 18D.png DHTMLGoodies.com 19. The Left Roof is larger than the Right Roof 19D.png DHTMLGoodies.com 20. The Right Roof fits against the inside of the Left Roof at the peak 20D.png DHTMLGoodies.com 21. This is the back edge... the bevels line up 21D.png DHTMLGoodies.com 22. The beveled eaves are down in use 22D.png DHTMLGoodies.com 23. Prepare flaps of tape on the Left Roof 23D.png DHTMLGoodies.com 24. Apply glue to the top edge of the Right Roof 24D.png DHTMLGoodies.com 25. Stretch the tape for a tight fit 25D.png DHTMLGoodies.com 26. Lined up on the top, front, and back 26D.png DHTMLGoodies.com 27. Use tape and/or a square object to hold the Right Roof straight 27D.png DHTMLGoodies.com 28. When the glue is dry, smooth the edges with 100 grit sandpaper 28D.png DHTMLGoodies.com 29. Smooth the Roofs too 29D.png DHTMLGoodies.com 30. This is how the Roofs fit 30D.png DHTMLGoodies.com 31. Glue 31D.png DHTMLGoodies.com 32. Lined up in back 32D.png DHTMLGoodies.com 33. Straight and parallel under the eaves 33D.png DHTMLGoodies.com 34. Adjust the fit - tape it tightly 34D.png DHTMLGoodies.com 35. Line up the other side - tape it tightly 36D.png DHTMLGoodies.com 36. Clean up excess glue 35D.png DHTMLGoodies.com 37. This way of taping doesn't yank the Front forward 37D.png DHTMLGoodies.com 38. Tape it both ways 38D.png DHTMLGoodies.com 39. Stretch the tape for a tight fit 39D.png DHTMLGoodies.com 40. Press the Dormer to a flat surface - let the glue dry 40D.png DHTMLGoodies.com 41. Ready to finish 41D.png
Slideshows support but do not replace the instructions