Foxhall Foundation

Preassembly: 'Inset' and 'Return'; from the "Foundation Short Pack" Foundation01L.png

Preassembly: Front & Bay, and Sides & Back Foundation02L.png

Tape together the points of the miters Foundation02.1L.png

Glue in the "V" Foundation02.2L.png

Temporary use of "Interior Longs" to hold the spacing - let dry Foundation03L.png

Lay out the position of the "Interior Longs and Short" Foundation04.5L.png

Let the glue dry Foundation04L.png

The Housebody is assembled without the Foundation Foundation05L.png

Being able to tape around the corners helps the assembly: tight and straight Foundation06L.png

The Foundation is ready Foundation05.4L.png

Without glue, set the house on the Foundation centered and lined up in back Foundation08L.png

Mark where to not apply glue Foundation11L.png

Take off the house, spread glue on top, put the house back on the Foundation Foundation07L.png

Centered in back: the Foundation comes about half-way under the Sidewalls Foundation09L.png

Centered in front: the Foundation lines up with the Bay Floors Foundation10L.png