back to the Dollhouse Workshop
  • The Bell Tower window parts, "T" molding, arch, and rail
    01.jpg
  • The Rail fits into the T like this... When I did this the set fit very tightly into the hole - to tight to allow for the thickness of paint...
    02.jpg
  • ...so I sanded each end of the Rail for a gentler fit.  5 passes this way pressing down firmly, then spin it half way and 5 more passes to keep everything even.  Turn it over and 5 + 5 more on the other end, and it fit well.
    03.jpg
  • Tip it into the opening
    04.jpg
  • Adjust the position of the Rail
    05.jpg
  • and install the arch
    06.jpg
  • This is the look from the inside
    07.jpg
  • ... and this is the outside.  Now I'll start over with painted parts.
    08.jpg