back to the Dollhouse Workshop
  • Church window parts (except the stained glass decal)
    10.jpg
  • Square the corners (IMPORTANT!).  Make small cuts, first from one direction...
    11.jpg
  • ... then from the other direction.  First from the front - then from the back.  Take out a little material, then a little more...
    12.jpg
  • ... until the corners are perfectly square.
    13.jpg
  • The pane fits in the groove
    14.jpg
  • In the final assembly, the parts will all be painted and the decal will be on the pane.
    15.jpg
  • The window from the outside
    16.jpg
  • ... and from the inside.
    17.jpg
  • This is how the corners fit if the "squaring" was thorough
    18.jpg
  • Here's the inside ready for your choice of interior trim
    19.jpg