back to the Dollhouse Workshop
  • Lever out the staples on both ends - cut the plastic wrap
    b01.jpg
  • Open both ends - slide out the parts
    b02.jpg
  • I see that parts are somewhat organized
    b02b.jpg

  • b03.jpg
  • Right off I notice clapboard on the walls
    b04.jpg

  • b05.jpg

  • b06.jpg
  • Big squares are floors
    b07.jpg
  • keep things that are alike together.
    b08.jpg
  • Time to use the Tape Measure
    b08c.jpg
  • I find the 1/2" thick foundations
    b09.jpg
  • Triangle with a 15 1/8 base...
    b10_02.jpg
  • and it's 10 5/8 tall...
    b10_03.jpg
  • with a groove - I have one with a window cutout and two blank.  These are (1) Gable Triangle and (2) Attic Endwalls.  I'll stack them together and mark them off the Parts List
    b10_04.jpg
  • There are lots of little squares.  Lets figure out what they are
    b10_05.jpg
  • 1/4" thick...
    b10_06.jpg
  • ...14" long...
    b10_07.jpg
  • ... yep, 14".  and it's 1 3/4" wide ...
    b10_08.jpg
  • It's the Gable Foundation.  I'm checking it off.
    b10_10.jpg
  • I will identify and check off all of the parts, and label them with post-its
    b10_10b.jpg