All American Barn

Tape-only assembly of the RR29 All American Barn ../../RGT_Website_assets/ajax-loader.gif

01. The Floor sticks out 1/8" in front (up) 01D.png

02. The 1/8" sticks into the grooves of the Front 02D.png

03. Taped tightly, everything lines up, let the glue dry, take off the tape 03D.png

04. Loft Floor and Loft Endwalls 04D.png

05. Lines up at the top corner of the Floor 05D.png

06. It may be glued to the Lower Walls or left loose 06D.png

08. Make sure the Endwalls are square with the floor - let the glue dry, take off the tape. 08D.png

09. The Bevel on the Lower Front Roof faces out 09D.png

10. Centered, and lined up at the top - it is easier to mark shingling guidelines first 10D.png

13. Glue and tape together the Rear Roof and Upper Eaves 13D.png

14. Glue and tape together the Upper Front Roof and the Rear Roof 14D.png

16. Centered, tight (add weights and tape), and lined up... let the glue dry. 16D.png

11. The Lower Eave fits in this orientation, but under the Upper Eave. 11D.png

12. It will line up with the Upper Eaves on the edges 12D.png

15. Let the glue dry... take off the tape 15D.png