



This slideshow shows how to cut electrification Slots with an Oscillating Multitool.
After Construction:
using roundwire and a drill
If your floors are tight in the grooves, scrape them |
DHTMLGoodies.com
Oscillating Multitool: there are many brands and a wide range of prices
OscillatingMultitool/OscillatingMultitoolD.png
DHTMLGoodies.com
Marking the slot with a layout stick from the 7999 wiring set
OscillatingMultitool/IMG_5868D.png
DHTMLGoodies.com
Keeping the angle as I move to the location
OscillatingMultitool/IMG_5872D.png
DHTMLGoodies.com
An Oscillating Multitool makes the perfect size slot
OscillatingMultitool/IMG_5879D.png
DHTMLGoodies.com
Testing with a scrap of Tapewire
OscillatingMultitool/IMG_5881D.png
DHTMLGoodies.com
With a little cleaning up, it slips thru the slot
OscillatingMultitool/IMG_5882D.png
DHTMLGoodies.com
Marking for the slot across the top of the Foundation
OscillatingMultitool/IMG_5883D.png
DHTMLGoodies.com
The blade is flat with the house
OscillatingMultitool/IMG_5884D.png
DHTMLGoodies.com
Cutting between the Base Floor and the Foundation
OscillatingMultitool/IMG_5885D.png
DHTMLGoodies.com
to the inside of the Foundation
OscillatingMultitool/IMG_5886D.png
DHTMLGoodies.com
with a little cleaning, the tapewire slips right thru
OscillatingMultitool/IMG_5888D.png
DHTMLGoodies.com
more cleaning, especially the edges
OscillatingMultitool/IMG_5890D.png
DHTMLGoodies.com
the peal-off backer is to the outside
OscillatingMultitool/IMG_5891D.png
DHTMLGoodies.com
Poking it up thru the slot into the house
OscillatingMultitool/IMG_5892D.png
DHTMLGoodies.com
a bit of wiggling and try-again
OscillatingMultitool/IMG_5893D.png
DHTMLGoodies.com
When it's tight it isn't visible anymore
OscillatingMultitool/IMG_5897D.png
DHTMLGoodies.com
Up thru the next slot... all the way around the house
OscillatingMultitool/IMG_5898D.png
|