Cocktail Straws (1/8" plastic straws, 5" long ) embedded in grooves in the walls or ceilings allow you to use solidwire but still install the fixtures after interior finishing is done.
Light Spackle
Trim Pack
DHTMLGoodies.com
01. This WallHouse, a Roombox, or other small vignettes are ideal for Coctail Straw conduit
01D.png
DHTMLGoodies.com
02. Careful heat from a hot-air gun, hair dryer, or candle will shrink the heated side and pull it in a crook
02D.png
DHTMLGoodies.com
04. Trim just farther than the surface of the straight part
04D.png
DHTMLGoodies.com
06. Cut a groove deep enough so the straw is below the surface
06D.png
DHTMLGoodies.com
09. Re-drill from the other side so the hole is straight
09D.png
DHTMLGoodies.com
10. Set the straw in the groove with the crook aimed to where the fixture will be
10D.png
DHTMLGoodies.com
12. Press the staple with a knife tip so it doesn't protrude
12D.png
DHTMLGoodies.com
18. This is #32 CirKit wire...
telephone wire is perfect too - it is color-coded
18D.png
DHTMLGoodies.com
36. Sticks or handy objects hold the ceiling while the glue dries
36D.png