JM401 Pre-Assembly

Pre-Assembly: do these things first ../RGT_Website_assets/ajax-loader.gif"

1. Identify and label the Parts PreAssembly/01D.png

2. PreAssembly/02D.png

3. PreAssembly/03D.png

4. Square the corners of the cutouts wuth a coarse file or a utility knife PreAssembly/04D.png

5. One cut up-and-down and one sideways from each direction PreAssembly/05D.png

6. Assemble the Foundation PreAssembly/06D.png

7. Space the Middle Foundations about 6 5/8" PreAssembly/07D.png

8. Make sure the glue dries with the foundation square PreAssembly/08D.png

9. Assemble the Rear Roof and Eaves - Line up the outside edge PreAssembly/09D.png

10. Make sure the glue dries with the Eaves square PreAssembly/10D.png

JM401 Pre-Assembly
		DHTMLGoodies.com Pre-Assembly: do these things first ../RGT_Website_assets/ajax-loader.gif" DHTMLGoodies.com 1. Identify and label the Parts PreAssembly/01D.png DHTMLGoodies.com 2. PreAssembly/02D.png DHTMLGoodies.com 3. PreAssembly/03D.png DHTMLGoodies.com 4. Square the corners of the cutouts wuth a coarse file or a utility knife PreAssembly/04D.png DHTMLGoodies.com 5. One cut up-and-down and one sideways from each direction PreAssembly/05D.png DHTMLGoodies.com 6. Assemble the Foundation PreAssembly/06D.png DHTMLGoodies.com 7. Space the Middle Foundations about 6 5/8" PreAssembly/07D.png DHTMLGoodies.com 8. Make sure the glue dries with the foundation square PreAssembly/08D.png DHTMLGoodies.com 9. Assemble the Rear Roof and Eaves - Line up the outside edge PreAssembly/09D.png DHTMLGoodies.com 10. Make sure the glue dries with the Eaves square PreAssembly/10D.png
	Pre-Assembly (here) Assembly Home Housebody Gable Porch Stairhole Customization
This slideshow supports but does not replace the instructions