Using the Spacers

The 2nd floor's FrontSet goes on just like the 1st 4600-50-lg.png

Spacers and Dividers 4600-51-lg.png

A damp towel to clean up glue 4600-52-lg.png

Line up the Fronts exactly 4600-53-lg.png

Let the glue dry 4600-53-lg.png

Spacers to the top (I needed more tape on one side to hold it tight) 4600-54-lg.png

Dividers 4600-55-lg.png

All the Spacers are ready 4600-56-lg.png

Glue in the grooves 4600-57-lg.png

Glue on the FrontSet 4600-58-lg.png

Tip the floor into position 4600-59-lg.png

Spread the fit a bit to avoid smeared glue 4600-60-lg.png

Line up and tape the back 4600-61-lg.png

Front-to-back tape to hold it lined up 4600-62-lg.png

A well-taped corner 4600-63-lg.png

Check the Front - this one is perfect 4600-64-lg.png

But this one is a bit off and needs adjusting 4600-65-lg.png

A straight piece to pull against and lots of stretched tape hold it in place 4600-66-lg.png

Let the glue dry 4600-67-lg.png

... on to the Attic ../../Buttons/ClickHere.png