Victorian Painted Lady

Slideshow A - Window Frames

1st Floor FrontSet

Tower (here)

8B Window Blocks

Victorian Painted Lady: Assemble the Tower
Many parts should be painted before assembly

DHTMLGoodies.com

Tower Parts TowerGable01_L.png

DHTMLGoodies.com

Pay attention to the clapboard direction TowerGable02_L.png

DHTMLGoodies.com

Tape the sets together TowerGable03_L.png

DHTMLGoodies.com

Glue the "V" and the ends TowerGable04_L.png

DHTMLGoodies.com

Clean up the excess glue TowerGable05_L.png

DHTMLGoodies.com

Glue the bottom edge of the Tower Back Wall set TowerGable06_L.png

DHTMLGoodies.com

Glue the back edge of the Bay Side that sticks up above the Roof TowerGable07_L.png

DHTMLGoodies.com

Set the Tower Set on the Roof - tape here. TowerGable08_L.png

DHTMLGoodies.com

Tape the inside of the Tower Walls to the Roof TowerGable09_L.png

DHTMLGoodies.com

Confirm the direction of the clapboard TowerGable10_L.png

DHTMLGoodies.com

Tape it tightly! TowerGable11_L.png

DHTMLGoodies.com

Support the Bay Top set with Bay Verticals lined up in the corners TowerGable12_L.png

DHTMLGoodies.com

I had to pull down on the Bay Top for a good fit TowerGable13_L.png

DHTMLGoodies.com

Lined up on top TowerGable14_L.png

DHTMLGoodies.com

Lined up on the inside - but this isn't where to adjust the fit TowerGable15_L.png

DHTMLGoodies.com

MAKE SURE the edge lines up TowerGable16_L.png

DHTMLGoodies.com

Test the window openings for "square" TowerGable17_L.png

DHTMLGoodies.com

Use long straps of tape - make the Tower parts square to the pane TowerGable18_L.png

DHTMLGoodies.com

Test it here - more tape was required TowerGable19_L.png

DHTMLGoodies.com

Test it here TowerGable20_L.png

DHTMLGoodies.com

On to the Gable ../../Buttons/ClickHere.png