J535 Carve

00. Remove the Logs in the windows and door ../../RGT_Website_assets/ajax-loader.gif

01. Cut the logs that overhang the hole 02D.png

02. Follow the window cutout 01D.png

03. Cut all the way to the corner 03D.png

04. Carve the excess mterial 04D.png

05. small slices give better control... 05D.png

06. .. and they are safer 06D.png

07. Carve to the corners in both directions 07D.png

08. even thinner flakes as you get to the end 08D.png

09. .. then clean out the middle 09D.png

10. Finish with a file 10D.png

11. Do the tops and the bottoms... 11D.png

12. .. and test with a window 12D.png

13. Do the top of the door cutout too 13D.png

14. Thin flakes 14D.png

15. Test the door 15D.png

00. Next (Foundation) Click the "Click" button (above) ../../Buttons/ClickHere.png