JM907 Assembly

Attach the Left Front Housebody3/907HouseBody51L.png

Glue on the right edge, glue in the grooves Housebody3/907HouseBody52L.png

... glue on the house's Left Side Housebody3/907HouseBody50L.png

Line up the top Housebody3/907HouseBody53L.png

Tape across the top so it won't slip Housebody3/907HouseBody54L.png

A Groove Fill Housebody3/907HouseBody55L.png

Tape it tight Housebody3/907HouseBody56L.png

A Groove Fill in the lower floor Housebody3/907HouseBody57L.png

Tight Housebody3/907HouseBody58L.png

Clean up the glue squeezings Housebody3/907HouseBody59L.png

Everything is tight and lined up - let the glue dry Housebody3/907HouseBody60L.png

Base groove and mid groove only Housebody3/907HouseBody61L.png

The instructions show a different order... either way is fine. Housebody3/907HouseBody62L.png

Lined up side-to-side. Tape the base tightly Housebody3/907HouseBody63L.png

Line up the Tower Front with the Tower Sides all the way up Housebody3/907HouseBody64L.png

Tight Housebody3/907HouseBody65L.png

I am using taping blocks (Blind Dividers) to hold the Tower Sides perfectly lined up Housebody3/907HouseBody66L.png

They make the fit exact while the glue sets Housebody3/907HouseBody67L.png

Lined up, straight, and tight. Let the glue dry Housebody3/907HouseBody68L.png