JM907 Roofs preparation

Top Tower Sides glued to the back of the Tower Front Roof/Roof01L.png

Lined up on top Roof/Roof02L.png

Both sides Roof/Roof03L.png

Hold the Side Roofs like this to determine the outside surface Roof/Roof04L.png

The outside will get shingle guidelines Roof/Roof05L.png

1 1/4" for the first guideline Roof/Roof06L.png

Mark both ends of the roofs then connect the marks Roof/Roof07L.png

This is the outside of the Left Front Roof Roof/Roof08L.png

Extend the marks on a big roof Roof/Roof09L.png

The Front Roof Roof/Roof10L.png

The Tower Roofs Roof/Roof11L.png

Prepare a "Stand": tape a Blind Divider to the Attic Divider Roof/Roof12L.png

The Stand will help hold up the Front Roof while you work on it Roof/Roof13L.png

Inspect the area the Front Roof covers on the Top Floor Roof/Roof14L.png

Scrape an area smaller than what the Front Roof covers Roof/Roof15L.png

Glue doesn't stick well to the floor covering Roof/Roof16L.png

Take care to stay well within the hidden space Roof/Roof17L.png

Next: Assemble the Roofs ../Buttons/ClickHere.png