Alison Top Floor

DHTMLGoodies.com

01. Lined up in back (test the fit in the groove) TopFloor/TopFloor01L.png

DHTMLGoodies.com

02. Lined up with the inside of the Side TopFloor/TopFloor02L.png

DHTMLGoodies.com

Are you wiring? click the button and go to the Second Gallery ../Buttons/ClickHere.png

DHTMLGoodies.com

04. Spread glue on top of the walls TopFloor/TopFloor03L.png

DHTMLGoodies.com

05. Glue in the groove TopFloor/TopFloor04L.png

DHTMLGoodies.com

06. Make the Sides fit with an 11/16 overhang TopFloor/TopFloor05L.png

DHTMLGoodies.com

07. Lined up in back, 11/16 overhang, taped firmly TopFloor/TopFloor06L.png

DHTMLGoodies.com

08. Lined up inside the stair cutout TopFloor/TopFloor08L.png

DHTMLGoodies.com

09. Check the length between the Tower and the edge of the floor TopFloor/TopFloor09L.png

DHTMLGoodies.com

10. The Roof doesn't quite come to the edge of the Floor TopFloor/TopFloor10L.png

DHTMLGoodies.com

11. The Left Front Roof fits the same way on the left TopFloor/TopFloor11L.png

DHTMLGoodies.com

12. Tape the long way to keep the floor from shifting TopFloor/TopFloor12L.png

DHTMLGoodies.com

13. Weights on the Floor over the Walls TopFloor/TopFloor07L.png

DHTMLGoodies.com

14. Stretch tape for a tight fit in the groove TopFloor/TopFloor14L.png

DHTMLGoodies.com

15. Check everything again; TopFloor/TopFloor13L.png

DHTMLGoodies.com

16. Let the glue dry TopFloor/TopFloor14L.png

SE-JM907 Top FloorAssembly		Click on the slide for a larger, printable image
This slideshow uses an un-finished dollhouse built for a special project. In your build, you should Paint, Finish the Floors, and do Wiring along the way. Housebody1 Housebody2 Housebody3 Painting (second-coat) Top Floor (here) Start the Wiring Foundation Porch Roof prep. Roof Dormer Details Trim and Brackets	DHTMLGoodies.com 01. Lined up in back (test the fit in the groove) TopFloor/TopFloor01L.png DHTMLGoodies.com 02. Lined up with the inside of the Side TopFloor/TopFloor02L.png DHTMLGoodies.com Are you wiring? click the button and go to the Second Gallery ../Buttons/ClickHere.png DHTMLGoodies.com 04. Spread glue on top of the walls TopFloor/TopFloor03L.png DHTMLGoodies.com 05. Glue in the groove TopFloor/TopFloor04L.png DHTMLGoodies.com 06. Make the Sides fit with an 11/16 overhang TopFloor/TopFloor05L.png DHTMLGoodies.com 07. Lined up in back, 11/16 overhang, taped firmly TopFloor/TopFloor06L.png DHTMLGoodies.com 08. Lined up inside the stair cutout TopFloor/TopFloor08L.png DHTMLGoodies.com 09. Check the length between the Tower and the edge of the floor TopFloor/TopFloor09L.png DHTMLGoodies.com 10. The Roof doesn't quite come to the edge of the Floor TopFloor/TopFloor10L.png DHTMLGoodies.com 11. The Left Front Roof fits the same way on the left TopFloor/TopFloor11L.png DHTMLGoodies.com 12. Tape the long way to keep the floor from shifting TopFloor/TopFloor12L.png DHTMLGoodies.com 13. Weights on the Floor over the Walls TopFloor/TopFloor07L.png DHTMLGoodies.com 14. Stretch tape for a tight fit in the groove TopFloor/TopFloor14L.png DHTMLGoodies.com 15. Check everything again; TopFloor/TopFloor13L.png DHTMLGoodies.com 16. Let the glue dry TopFloor/TopFloor14L.png