Tower&Roof

DH77K Tower and Roof

Slideshows support but do not replace the instructions

Parts
PreAssembly
Floors, Foundations, and Roofs
Mark the Floors for painting
Paint
Assembly:
Housebody 1: First floor
Housebody 2: Second floor
Top Floor - mark and paint
Tower and Roof (here)
Exterior Frinishing
Index
    Corner Trim
    Windows
    Shingles and Dormers
    Rails Assemble  Install  Addendum
Interior Frinishing
Interiors Home
Interior Window Trim
Dividers
Stairs, Banister & Landing

DHTMLGoodies.com

40. Glue the Tower to the Top Floor lined up on the inside with the Stair Hole 40D.png

DHTMLGoodies.com

41. Lined up in back and squared with the Rooftops 41D.png

DHTMLGoodies.com

41B. Confirm the measurement is the same front-and-back 120D.png

DHTMLGoodies.com

42. The right corner lines up on all three floors 42D.png

DHTMLGoodies.com

43. Put Dividers between the lower floors to keep them from sagging... 43D.png

DHTMLGoodies.com

44. .. and weight the Tower 44D.png

DHTMLGoodies.com

45. The Attic Divider set lined up in back 45D.png

DHTMLGoodies.com

46. Space the Attic Divider a bit so glue squeezings won't get on it 46D.png

DHTMLGoodies.com

47. Glue on the bottom edge and the edge that touches the Tower 47D.png

DHTMLGoodies.com

48. Carefully tip the Roof set into position to avoid smearing the glue 48D.png

DHTMLGoodies.com

49. Lined up in back, parallel along the edge 49D.png

DHTMLGoodies.com

50. Pushed against the Tower 50D.png

DHTMLGoodies.com

51. Clean up the glue squeezings 51D.png

DHTMLGoodies.com

52. 52D.png

DHTMLGoodies.com

53. The top of the Front Roof lines up with the top of the Attic Divider 53D.png

DHTMLGoodies.com

54. The Front Roof touches the Attic Divider along the entire front edge 54D.png

DHTMLGoodies.com

55. Tape the Roof to the Tower 55D.png

DHTMLGoodies.com

56. Clean up excess glue on the inside 56D.png

DHTMLGoodies.com

57. Space the Attic Divider away fromt the Tower Side to avoid glue squeezings 57D.png

DHTMLGoodies.com

58. apply glue to the tops of the roofs and the longer edge of the Rooftop 58D.png

DHTMLGoodies.com

59. 59D.png

DHTMLGoodies.com

60. Lined up in back at the Tower Side 60D.png

DHTMLGoodies.com

61. Tape the Rooftop to the Tower Side 61D.png

DHTMLGoodies.com

62. Parallel with the Side Roof 62D.png

DHTMLGoodies.com

63. Another way to see that the roof is parallel with the Rooftop 63D.png

DHTMLGoodies.com

64. Tape 64D.png

DHTMLGoodies.com

67. Weight. Let the glue dry. 67D.png

DHTMLGoodies.com

65. Repeat for the other Roof 65D.png

DHTMLGoodies.com

66. Parallel and lined up in back 66D.png

DHTMLGoodies.com

68. Taped, weighted - let the glue dry 68D.png

DHTMLGoodies.com

69. The Tower Ceiling (sometimes called "Tower Floor"), centered side-to-side 69D.png

DHTMLGoodies.com

71. Lined up in back 71D.png

DHTMLGoodies.com

70. Check the centering 70D.png

DHTMLGoodies.com

72. Weight, let the glue dry 72D.png